Full installation included in the price.
The new generation of simple and comprehensive vehicle security. The Ghost Immobiliser 2 fully secures your vehicle from key theft, key cloning, hacking and keyless entry.
The Ghost Immobiliser 2 is the most advanced car immobiliser available and is compatible with all major vehicle models. Your vehicle will only start once your unique Pin code sequence is entered (conveniently using the existing buttons in your cockpit) This means that there is no way that a thief will be able to start your vehicle… even if they have your keys!
Engine start blocking
Protects Against Key Theft /Keyless Entry /Key Cloning
Thieves using key cloning technology are not able to clone keys or replace the ECU of the vehicle in order to override the Ghost Immobiliser security. Regardless of the theft technique it is impossible to start your vehicle without your unique PIN first being entered.
Undetectable
Modern thieves can use diagnostic equipment to detect circuit cuts and aftermarket security. The Autowatch Ghost has no cut, so cannot be detected using these techniques. The Ghost does not emit any kind of frequency either… making the Ghost invisible and silent to thieves!
Fully reversible
Your Ghost Immobiliser can be removed and reinstalled in a new vehicle without any indication that it was ever there.
Your Ghost Immobiliser is connected directly to your vehicle’s CAN (Controller Area Network).
From there a customised PIN is generated specifically for you. This PIN is a unique private sequence, using buttons on your dash and steering wheel.
This means only those who know the combination are able to start your vehicle.
Within a couple of drives you’ll be totally familiar with your Ghost and it will just be another part of starting your car…. but with the added security … and full peace of mind!!
- installation included
- Disarm sequence via buttons on steering wheel / dash
- No transmitted radio frequency signals
- Immobilisation by communicating with the ECU
- Uses the on-board CAN data network
- User changeable disarm sequence
- Service / Valet mode for when you need others to use your vehicle
- Secure and unique emergency code for if you ever forget your disarm sequence
Features
Protects Against Key Theft /Keyless Entry /Key Cloning
Thieves using key cloning technology are not able to clone keys or replace the ECU of the vehicle in order to override the Ghost Immobiliser security. Regardless of the theft technique it is impossible to start your vehicle without your unique PIN first being entered.
Unique PIN
Your own unique PIN is created using the vehicle’s buttons and steering wheel control panel. There is no way for a thief to know the combination in advance or even detect that an immobiliser is present on the vehicle.
You can change the PIN any time you would like to.
Quick, Simple and User Friendly
The Ghost Immobiliser is perhaps the most comprehensive vehicle security available.
On top of this it is extremely user friendly. Your pin will be unique to you, making it simple to remember – but mathematically impossible for a thief to guess.
In addition, if you do forget your PIN your engineer will have provided with an Emergency PIN Code override. Simply scratch this off the card and follow the instructions to reset your PIN.
Stealth Silent Operation
With a Ghost Immobiliser installed there is now way a thief will be able to detect the ‘tell-tale’ clicking of a traditional immobiliser.
This is because your Ghost Immobiliser communicates directly with the ECU on the data bus to immobilise your vehicle.
The Ghost Immobiliser is weatherproof and so small that it can be combined in to the vehicles mechanism making it practically impossible to detect.
Engine Start Blocking
Your Autowatch immobiliser prevents the starting of your vehicle unless the user has entered the user generated PIN.
This is even if they have the keys with them, protecting your vehicle against key theft, keyless entry and key cloning.
No Detectable RF Signals or Diagnostics
Thieves can use Radio Frequency Scanners to detect the fitted security on the vehicle.
Your Ghost Immobiliser does not transmit and detectable radio frequency signals, making it undetectable under these circumstances.
Organised car thief gangs can detect circuit cuts on vehicles using diagnostics reading devices.
The Ghost Immobiliser does not involve any circuit cuts, so is once again undetectable to thieves using this method
Service Mode
You may need someone else to drive your vehicle temporarily (e.g. valet parking) or when your vehicle is being serviced.
In such an instance you can set ‘Service Mode’, allowing your vehicle to be started and driven without the need for the PIN.
Uses the CAN Bus (Controller Area Network)
Using the CAN Data Bus means a low likelihood of your immobiliser being found as well as simple / reversible installation.
The Ghost protects your car from key-cloning, hacking, and even key theft. The Ghost has no key-fobs or LED indications to give away its location. The Ghost uses the buttons in your vehicle such as those on the steering wheel, door panels or centre console, to allow you to make a unique, changeable, disarm sequence (like a PIN code) that must first be entered before you can drive your car. Just like your credit card but you can make your car disarm sequence even safer by making it up to 20 presses long!
In order to make extreme security also be hassle free, we have created a smart-phone application that connects to your car and allows you to get in and drive without having to enter the disarm sequence. This Ghost-II allows 2 phones to be connected. All you have to do is pair your phone with your Ghost-II, leave the Autowatch Ghost-II application running in the background with Bluetooth enabled and you can drive conveniently and securely. However, remember that if you phone is in range (5m to 10m) and the application is running the Ghost-II will be disarmed.
- Immobilisation by communicating with the ECU
- Disarm sequence via buttons on steering wheel / dash
- No transmitted radio frequency signals
- Uses the on-board CAN data network
- User changeable disarm sequence
- Service / Valet mode means the disarm sequence is never compromised
- Secure, unique emergency code should the disarm sequence be forgotten
- Mobile application can connect to 2 phones to allow quick disarm